The Checktemp® delivers high accuracy temperature measurements over a wide range without concern for breakage or condensation. The Checktemp® offers no breakage, no waste, and no difficulty in reading; the digital display prevents a parallax error (observing the wrong measurement due to the angle of view) and is optimised for a wide range of environmental temperatures. Checktemp® is provided with Hanna’s unique CAL Check™ function for accurate measurements every time. The Checktemp® implements a CAL Check™ upon startup and reports the status as ″0″ or ″err″. The sharp-tip probe of the Checktemp® easily penetrates semi-solid products making routine temperature checks simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.

• CAL Check™ automatically verifies the thermometer circuit accuracy at 0.0°C every time it is switched on, during start up, the calibration of the thermometers circuit is checked and the result is briefly displayed on the thermometers display to show the operator the calibration result
• Save battery life with auto-off feature, select from 8 minutes, 60 minutes, or disable the feature.
• Easily replace the battery with a twist-off cover
• Protective probe sleeve included protects the probe when not in use
• Water resistant - can withstand temporary exposure to water, but should not be submerged or washed under running water
• Range: -50.0 to 150.0°C
• Resolution: 0.1°C
• Accuracy: ±0.2°C (-30.0 to 120.0°C); ±0.3°C (outside: -50.0 to -30.0°C and 120.0 to 150.0°C)
• Probe: fixed stainless steel 106 x diameter 3.6mm (penetration)
• Battery type: CR2032 li-ion
• Battery life: approx. 2000 hours of continuous use
• Environment: -30 to 50°C; IP65
• Dimensions: 50 x 185 x 21mm
• Weight: 50g